Enclosed electromagnetic starter NQ3-5P 7-10A IP55 CHINT

Ready-made starting solution: Enclosed electromagnetic starter CHINT NQ3-5P (7 – 10A, 380V, IP55) The NQ3-5P series electromagnetic starter from CHINT is a fully equipped device for direct-on-line starting, stopping and protection of three-phase induction motors. The starter is already mounted in a protective enclosure with control buttons and a thermal relay, which allows the equipment to be installed and commissioned as quickly as possible without selecting separate components. Technical characteristics The NQ3-5P model combines the functionality of a contactor with the reliable protection of a thermal relay: Thermal relay setting range: 7 – 10 A. Rated coil voltage: 380 V AC (50 Hz). Rated insulation voltage: 690 V. Enclosure degree of protection: IP55 (protection against dust and water jets, suitable for installation in production shops and damp rooms). Enclosure material: Impact-resistant, non-combustible plastic. Controls: Built-in «Start» (green) and «Stop/Reset» (red) buttons. Advantages of the NQ3-5P starter Using a ready-made enclosed starter offers a number of operational advantages: All in one: An NXC series contactor and an NXR thermal relay, wired to the standard circuit, are already installed inside the enclosure. High IP55 degree of protection: The sealed enclosure allows the device to be used in dusty rooms, at car washes, in agriculture and on open sites under a canopy. Comprehensive motor protection: The relay not only provides protection against prolonged overloads but also responds to phase loss. Ease of maintenance: The spacious enclosure makes cable routing easier, and the sealed cable entries (glands) ensure secure fixing of the wires. Compactness: The minimal dimensions allow the starter to be placed right next to the driven unit. Areas of application With its 7–10A range, this starter is optimally suited for controlling motors rated about 4.0 kW (at 380V): Industrial machine tools: Drilling, turning and woodworking machines. Pumping stations: Control of borehole pumps and irrigation systems. Construction equipment: Concrete mixers, hoists and compressors. Ventilation: Control of powerful exhaust fans and air supply units. Connection instructions Remove the front cover of the starter enclosure. Fix the enclosure to a vertical surface through the mounting holes. Route the supply cable and the motor cable through the sealed entries (glands) in the bottom or top of the enclosure. Power connection: Connect the three supply phases to the contactor terminals (L1, L2, L3) and the motor cable to the output terminals of the thermal relay (T1, T2, T3). Setting: Using the dial on the thermal relay, set the current corresponding to the rated current of your motor (according to the nameplate). Close the cover and check the operation of the device by pressing the «Start» and «Stop» buttons. Order the CHINT NQ3-5P electromagnetic starter right now — ensure fast installation and reliable protection of your electrical equipment in any conditions!

Manufacturer

CHINT

Shipped from the Almaty warehouse on the day of your request. Across Kazakhstan we ship by freight carriers; the manager will calculate the cost.

Payment: invoice for legal entities, Kaspi Pay, Halyk ePay. Prices include VAT.

More about delivery and payment terms →